Not taking proper care of the car can affect how it drives and how it drinks; The solution can be quite simple
The car can lose power as time goes by and you barely feel it, as it is a gradual process. Performing simple maintenance can make the original factory vitality back to the vehicle and improve performance without major expense.
We are not talking about preparation or modifications. We will bring here some services that can be done in a service that will make your car smarter. The improvement in performance is not to bet on races, but to have more safety in overtaking and agility in traffic.
SEE ALSO:
The spark plugs emit a spark that is responsible for burning the fuel. When they are worn out, they become weak or may fail, resulting in incomplete combustion.
This reduces performance, increases consumption, makes the car emit more and will create more carbon deposits. Replacing the spark plugs with new parts and within the original specifications will make the fuel burn complete and solve the problems we mentioned.
Using iridium candles may make them work better, but they are more expensive than regular candles. On the other hand, the durability is greater, spacing out the changes more.
A modification that is practically mandatory in prepared cars is to put an air filter with less restriction. This component serves to remove impurities from the air admitted by the engine.
In an original car, this modification is not so advantageous. Just changing the saturated air filter for a new one will help improve performance and with a low investment.
Pay attention to the deadline for changing the air filter, as it can be shortened if it runs through environments with a lot of dust. Manufacturers generally recommend changing it every service or every other service.
There are still many drivers who think they know more about the car than the company that designed it. That’s why they put a lubricating oil of a different specification, “thicker”, because it worked in old cars.
Adopting an oil with a higher viscosity in an engine will increase the effort for operation, as the galleries and tolerances were designed with the original lubricant in mind. This will result in worse performance and higher consumption.
Using lubricating oil in the original specification ensures proper engine operation. And you don’t need to worry about durability, the project took that into account as well.
It is of no use, the engine is in perfect condition if this force is not passed to the ground properly. Tires are essential for the car’s performance and for the safety of the occupants.
Using worn tires reduces grip, it doesn’t turn into a Formula 1 slick after finishing the grooves. If it still has grooves but the rubber is dry, the grip will be low in all situations.
Putting on tires that are too cheap and of low quality also hurts performance. The ideal is not to skimp on rubber and always use first-rate models from the most traditional manufacturers.
A good tire will provide safer starts, more cornering grip and will be safer on wet roads. Generally, the first-line models also offer greater durability and have a compound that reduces rolling, to help with consumption.
When the car has burst shock absorbers, there is excessive body movement. In sprints, for example, the front can lift more, reducing the friction of the tires with the ground. This hinders performance.
There is also the most common consequence of bad shock absorbers impairing performance, which is reducing stability in curves. Replacing them with new parts will make driving safer.
Is the car up to date with maintenance but suddenly lost performance? Try to fill up at a reliable station, even if it is more expensive, this can solve the problem.
Using adulterated fuel will impair the car’s performance, increase consumption and can damage engine components. Spending a little more when filling the tank can be rewarded with lower consumption and avoids unscheduled trips to the workshop.
In cars powered only by gasoline, it is necessary to be more careful when filling up. Today it is common to “baptize” the fuel with more ethanol than the 30% regulated by law. This does not affect flex-fuel engines, but those that use only gasoline or ethanol will experience malfunctions and loss of performance.
